Hyper SLI control panel tells me Hypervisior Properly enabled and works. I do not understand, thank you for your help. With profile and rendering SLI option "Force rendering images altertative 1" GPU 0 load is 99%, GPU 1 is 93% and GPU score is still 665 ! On Furmark 1.10 without profile, GPU 0 load is 99%, GPU 1 is 0% and GPU score is 665. A benchmark on MSI Kombustor 2.4, without the GPU profile 0 is loaded to 99%, between 0 and 1 GPU%! profile with the GPU 0 is loaded to 99%, between 15 and GPU 20%: The option to SLI rendering "One GPU", no change framerate and screen still flickers. The option to SLI rendering "Force rendering images altertative 1" the 3 games flickers/sparkles and no frameate change. Create a profile with default setting for each game, without success. I decided to see what happens in the concrete I run 3 games (need for speed most wanted 2012, Dirt 3 and Test Drive Unlimited 2) and surprise, no change in performance ! in 1 of the 3 games you can even see flickering with SLI vertical gauge on the left.
NVIDIA GTX 680 HOW TO ENABLE SLI INSTALL
So I installed my two GTX 260, SLI bridge, drivers 301.42 (latest compatible if I understood correctly?) Windows UAC disabled, Virtualization Technology enabled in BIOS, install and boot HyperSLI 0.96 on Windows 7 圆4 HyperSLI. This is my first post, hope it is not botched too much. Thought it was about time to pass some along myself. I often browse Tech Power Up Forums for information. I wont keep this configuration, but had to see if it could be done. The GPU's are running stock 650MHz/900MHz(x2). I have not tried any other tweaking so far.
NVIDIA GTX 680 HOW TO ENABLE SLI 64 BIT
With my Athlon II X2 245 Regor 2.9GHz (running at 3.61GHz), a single 2G stick 800 DDR2 ram (at 996) and Windows 7 Ultimate 64 bit it consistently scores just over 14000 in 3dMark06. Do not think it is on the list of mobos that are known to be compatible with SLIPatch_v1.5_beta, but was bored and though I would give it a shot.įor everyone's information: It Works Great!! Installed without a hitch using the 275.33 driver package (do drivers first).
It sounds like a mouthful but it’s a really cool piece of technology that has also been attempted by NVIDIA’s competitors, AMD, with their CrossFire brand. My motherboard is a GIGABYTE GA-MA790GP-UD4H (crossfire). Scalable Link Interface or SLI is the brand name for NVIDIA’s multi-GPU technology designed to combine two or more graphics cards into a single output using a parallel processing algorithm. What that means is it is possible to pair to different variations of the same model. The two cards do not necessarily have to have the same clock speed, just the same model graphic card and memory capacity. Both these cards need to be of the same model for SLI. Had two Palit NE/9600T+0152 (9600GT 512MB) setting around from a trade. Obviously for dual graphics cards we will need two physical graphic cards. Was reading through the forum and became interested in this subject.
0 kommentar(er)
